Flush Diaphragm Pressure Transmitter
Overview of Flush Diaphragm Pressure Transmitter
A Flush Diaphragm Pressure Transmitter is specifically designed for use in difficult measuring conditions, like those encountered during measuring of pressure of highly viscous or solid carrying fluid. As an efficient Flush Diaphragm Pressure Sensor, it incorporates a diaphragm which is positioned in flush manner with the front of the device, thus preventing accumulation of any contaminants and dirt which usually occurs in conventional pressure transmitters. Thus, thanks to this clear design, its measurements are not affected by the presence of thick or sticky process fluid. It serves as a reliable Flush Diaphragm Pressure Transducer, allowing measurements of both relative (gauge) and absolute pressure. The operating temperature range of this unit is compensated from -10C to 80C and the measuring range is extended from 0 to 100 mbar to 0 to 400 bar, providing a flexible solution for low and high pressure measurements. For efficient measurement in harsh conditions, RBA OPTISYNC PRIVATE LIMITED presents an advanced flush diaphragm pressure transmitter.
Main Features
- Precise & accurate
- Flush Diaphragm process connection
- Wide range compatibility
- Fully welded design
Applications
- Air application
- Factory automation
- Pharma industries
| Performance Characteristics | |
|---|---|
| Pressure type | Relative (gauged) & Absolute |
| Compensated temperature range | -10 ... 55°C |
| Measuring Range | 0...100 mbar ~ 0...400 bar |
| Long term stability | <0.3 % FSR/year |
| Accuracy | 0.5% FS |
| Response time | <5 ms |
| Min. measuring span | 100 mbar |
| Max. measuring span | 400 bar |
| Over pressure | 1.5 times FS |
| Temperature coefficient | <0.15 % FSR/10K, measuring span <0.25 % FSR/10K, zero point |
| Process temperature | -30 ... 80°C |
| Process pressure | Refer measuring range for Process pressure |
| Connection variants | G 1/2 Flush Diaphragm |
